BJTLJ - INTERIOR SOLVENT BASE
- MSDS: BJTLJ
- Manufacturer: VOGEL PAINT AND WAX CO INC
- Product Name: INTERIOR SOLVENT BASE
- National Stock Number: 8010-00F014020
Product Identification
Product ID:INTERIOR SOLVENT BASE
MSDS Date:05/17/1988
FSC:8010
NIIN:00F014020
MSDS Number: BJTLJ
Responsible Party
ORANGE CITY, IA 51041
Emergency Phone: (712) 737-4993
Info Phone: (712) 737-4993
Cage: ODSM4
Contractor
Telephone: (712) 737-4998
Cage: ODSM4
Ingredients
ODORLESS SPIRITS
Fraction By Weight: 15%
ACGIH TLV: 200 PPM
MINERAL SPIRITS, PETROLEUM SPIRITS
CAS: 64475-85-0
RTECS: PY8240000
Fraction By Weight: 15%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
ETHYLENE GLYCOL (SARA III)
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: <0.5%
OSHA PEL C 50 PPM
ACGIH TLV: C 50 PPM,VAPOR; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY IRRITATION.
EYE: IRRITATION & DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: REPEATED/PROLONGED OVEREXPOSURE TO
SOLVENTS CAUSE PERMANENT BRAIN/NERVOUS SYSTEM DAMAGE. INTENTIONAL
MISUSE BY DELIBERATELY CONCENTRATING/INHALING THE CONTENTS MAY BE
HARMFUL/FATAL. CHRONI CE EXPOSURE MAY CAUSE DAMAGE TO THE CNS,
RESPIRATORY SYSTEM, LUNG, LIVER, GASTROINTESTINAL
TRACT/SPLEEN/KIDNEYS/BLOOD.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING TREAT
SYMPTOMATICALLY. EYES: FLUSH W/WATER FOR AT LEAST 15 MINUTES. SKIN:
WIPE OFF W/TOWEL. REMOVE REMAINDER W/MINERAL SPIRITS, TURPENTINE,
OR LACQUE R THINNER. WASH W/SOAP & WATER. OBTAIN MEDICAL ATTENTION
IN ALL CASES.
Fire Fighting
Flash Point:104F
Lower Limits:3.2%
Extinguishing Media:CO2, DRY CHEMICAL, OR FIRE FOAM
Fire Fighting Procedures:WATER IS UNSUITABLE, BUT MAY BE USED TO COOL
CLOSED CONTAINERS.
Unusual Fire/Explosion Hazard:KEEP AWAY FROM HEAT, SPARKS, & FLAME
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, FLAMES, HOT
SURFACES, ELECTRICAL EQUIPMENT, STATIC, OR FRICTIONAL SPARKS).
VENTILATE AREA. USE NON-SPARKING TOOLS. REMOVE W/INERT ABSORBANT.
Handling
Handling and Storage Precautions:DON'T STORE NEAR HEAT, SPARKS, OR
FLAME.
Exposure Controls
Respiratory Protection:IN CONFINED AREAS OF POOR VENTILATION, USE
CHEMICAL CARTRIDGE RESPIRATOR OR SELF-CONTAINED BREATHING
APPARATUS.
Ventilation:PROVIDE MECHANICAL & LOCAL EXHAUST VENTILATION IN VOLUME &
PATTERN TO KEEP
Eye Protection:SAFETY GLASSES, GOGGLES
Other Protective Equipment:NONE
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:311-400F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:49.87%
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, SOURCES OF
IGNITIONS, HOT SURFACES, ELECTRICAL EQUIPMENT, STATIC.
Hazardous Decomposition Products:FIRE, BURNING & WELDING MAY GENERATE
CO
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.